LCD Network Cable Tester Meter SC-8108 Introduction

Network cable tester, also called network wire tester is a powerful special tool to solve and prevent cable installation problem. It is the best choice to verify any speech and data cable
installation procedure. Network cable tester is always being used to test LAN datacom and telecom cable. The tester is capable to have a number of tests such as cable connection sequence, length, user jumper and cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference. The powerful and user-friendly features enable network installers to accurately check pin configurations of various voice and data communication cables.

FiberStore offers many kinds of network cable tester including LAN network cable testers, LCD cable testers, underground wire locators, network cable scanner, etc. In this article, we will mainly introduce one of the main LCD cable tester – Wireless network LAN phone cable LCD tester meter SC-8108

This Multi-Network cable tester is a powerful tool to prevent and solve cable installation problem. The tester will automatically detect far-end matcher (ID) or local port (L) cable and displays if the far-end of cable to be checked does not insert into the far-end matcher (ID) or if the cable does not insert into the local port (L) in local test. This network cable tester instantly check your LAN cable wiring for proper continuity, shorts, and pair integrity. Test results are digitally shown via its LCD and it instantly displays the exact configuration of the cable. It performs line test without requiring the external adapter. With single board computer software watchdog design and reliable operating time. This covers wide array of applications such as cable connection sequence, length, user jumper or crossfire, cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference.

Key Description
Power Supply
The tester uses 4 x 1.5V size AA alkaline batteries with power consumption 16 mA. The batteries should be taken out if the tester does not use for a long time to prevent the battery rack from leaking electrolyte corrosion.

Tester Panel and Port
Loopback port
Main port
LCD display screen
Power switch
Function key
Confirmation/return key

Type of Tester Cable: STP/UTP twin twisted cable, coaxial cable, telephone line
Tester Port: Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R)(BNC and RJ11 converters (not included in the set), can be used to measure and check the continuity of coaxial cable and telephone line)
Length Measurement of Twin Twisted Cable: Scope: 1 to 350M (3 to 1,200 FT) calibration; Calibration accuracy: 3% (± 0.5m or ± 1.5 ft) (calibrating cable > 5 M);
Shipment accuracy: 5% (± 0.5m or ± 1.5 ft) (AMP, AT&T Class 5 cable); Unit of Measurement: Display in meter (M) or feet (FT)
Length Calibration:User can set self-calibration factor by a given length cable. The length of calibrating cable is more than 5M
Wire Sequence and Locating Cable Error: Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference
Locating Cable: Included 1 far-end passive test jack
Powerd by: 4 x AAA batteries
Automatic Time-delay Shut Off Time: The tester is idle for 30 minutes
Working Ambient Temperature: -10°C to 60°C
LCD size: 2.6″
Color: Grey

For more information about the LAN Phone Cable LCD Tester Meter SC-8108, please visite

此条目发表在Fiber Optic Tester分类目录,贴了标签。将固定链接加入收藏夹。