Common 14 Slots And 16 Slots Media Converter Rack Chassis

Media Converter Chassis is actually predominantly useful to manage all kinds of media converters, together with most of the converters plugged into any chassis could publish same exact power supply. Any fiber media converter chassis will produce a lot of media converters utilizing ability, this would effortless any links and structure, it will job stably and adapt broad width of voltage. It will retail outlet good ability and may also get powered together with monitored conveniently. And any maintenance of this chassis is simple.

14 Slots Rack Single Power Supply AC 220V 19' 2U Fiber Media Converter

FiberStore has two types of rack-mounted fiber optic media converter chassis for unmanaged media converters : 2-U 14 slots media converter chassis and 2-U 16 slots media converter chassis .The 14 slots fiber optic media converter chassis supports plug-and–play installation of stand-alone media converters convert modules ,can hold at most 14 pieces media converters. The 16 slots fiber optic media converter chassis should be used with card-type media converters .The 16 slots media converter chassis can hold at most 16 card-type converters of 10/100M.

Installing at the center of network, the 14 Slot Fiber Optic Media Converter Chassis Rack not only reduce the links, simplify the structure, but also ease for management and maintenance.

14 Slot Fiber Optic Media Converter Chassis Main features:
The power of the Rack can be supplied by the type of single power or dual power. Adopting dual power supply, the load of each power can be reduced and the life of the power would extend;
When one power supply is at fault, the other one can still work independently. It would enhance the reliability of the RACK;
Supplying the Converters or Powers to be plugged and played;
It is possessed of stable performance, large capacity of power supply, and ease for management and maintenance;
2U high: 19-inch standard design.

Media converter chassis is acceptable for the most 16 sets of different Media Converter Cards within a rack-mountable chassis which is supplied with unified power. Installing at the center of network, it can not only reduce the links, simplify the structure, but also ease for management and maintenance. It can be tidily placed at any network environment. The external form of RACK is simple and tidy. It is ready for 10/100Mbps, 10/100/1000Mbps Converter Card to be plugged in, and will be the best solution of network connections for the continuous development of network.

Media converters transparently connect one type of media, or cabling, to another – typically copper to fiber. Available in stand-alone, modular chassis-based, or PCI powered configurations, FiberStore‘ media converters offer copper to fiber and fiber to fiber media conversion in the following supported protocols: Ethernet Media Converter, Fast Ethernet, Gigabit Ethernet, Power-over-Ethernet, 100/100, 10/100/1000, ATM, T1/E1, DS3/E3, POTS, RS232 to Ethernet, RS485 and more. By bridging the gap between legacy copper infrastructures and fiber growth, our media converters provide an economical path towards extending the distance of an existing network, extending the life of non-fiber based equipment, or extending the distance between two like devices.

This entry was posted in Conveters & Multiplexers and tagged , , . Bookmark the permalink.

Leave a Reply